fishers64 Posted June 4, 2015 Share Posted June 4, 2015 My suggestion: foam. Lost of foam. Dense foam ball and sticks with big foam heads that have something like this on the other end. No need to worry about too much padding because you'd be playing with foam, making it much easier to handle and way less likely to hurt someone. And also because making high-end sports equipment from scratch will cost a lot of money, whereas foam is cheaper and much easier (and safer) to work with.Yeah, I'm going to say that this is the best suggestion being put forward so far. Otherwise, metal stick hitting a metal ball could harm innocent spectators. Quote Hero Factory RPG | Bionicle Mafia XXIX: Storyline & Theories Link to comment Share on other sites More sharing options...
Grungemeister Posted June 4, 2015 Share Posted June 4, 2015 I would say iron would work best. Iron or steel. Hammer shaped. One side flat for direct shots. The other side a curved pick so the ball can be redirected mid-air by using the curve in the pick.That would be pretty unwieldy. Plus, I'm not a metalsmith, so I really have no way of doing that. By curved pick, do you mean like a pickaxe or like a hammer with the two prongs? Another thing to put on the other side would be a hockey stick-like paddle to just dribble the ball. I might just look up how to make a wooden mallet and stick it on the other end of the shaft. I'm not afraid of a wooden club breaking or anything, since wooden golf clubs work very well. As for the scoop, I was thinking of getting a relatively strong piece of metal (maybe a cylindrical rod) and bending it into shape, and then laying one strip of nice thick sheet metal across the bottom. Not only would it make the scoop lighter, but it would allow air to pass through.Alright, so not iron or steel. I mean like a pickaxe. But the underside curved. Also dribbling the ball isn't really something done in kolhii. The scoop sounds like a nice idea, I approve I meant dribbling in a soccer meaning, not a basketball meaning, if that's what you thought . I've got a rough sketch of my ideas drawn up on paper, but I don't feel like scanning it into my computer right now. I'll have that tomorrow, as it is pretty late here. As for a ball, I'm thinking just a normal solid rubber ball, about 4 inches (10 cm) in diameter. The shield will be the easy part. Of course I'm going to paint it in the colors and designs of a Koro, so which one do you guys want to see? I'm thinking Ta-Koro, bcause it would technically double as a guard shield as well . Po-Koro would look nice, too, with natural brown and tan colors. 1 Quote A RUDE AWAKENING - A Bionicle G1 continuation and video-game project(MUSIC COMPOSER) special thx to Inary the Gunhaver for my new username. Link to comment Share on other sites More sharing options...
Owlexander Posted June 4, 2015 Share Posted June 4, 2015 I would say iron would work best. Iron or steel. Hammer shaped. One side flat for direct shots. The other side a curved pick so the ball can be redirected mid-air by using the curve in the pick.That would be pretty unwieldy. Plus, I'm not a metalsmith, so I really have no way of doing that. By curved pick, do you mean like a pickaxe or like a hammer with the two prongs? Another thing to put on the other side would be a hockey stick-like paddle to just dribble the ball. I might just look up how to make a wooden mallet and stick it on the other end of the shaft. I'm not afraid of a wooden club breaking or anything, since wooden golf clubs work very well. As for the scoop, I was thinking of getting a relatively strong piece of metal (maybe a cylindrical rod) and bending it into shape, and then laying one strip of nice thick sheet metal across the bottom. Not only would it make the scoop lighter, but it would allow air to pass through.Alright, so not iron or steel. I mean like a pickaxe. But the underside curved. Also dribbling the ball isn't really something done in kolhii. The scoop sounds like a nice idea, I approve I meant dribbling in a soccer meaning, not a basketball meaning, if that's what you thought . I've got a rough sketch of my ideas drawn up on paper, but I don't feel like scanning it into my computer right now. I'll have that tomorrow, as it is pretty late here. As for a ball, I'm thinking just a normal solid rubber ball, about 4 inches (10 cm) in diameter. The shield will be the easy part. Of course I'm going to paint it in the colors and designs of a Koro, so which one do you guys want to see? I'm thinking Ta-Koro, bcause it would technically double as a guard shield as well . Po-Koro would look nice, too, with natural brown and tan colors. Ta-Koro shield, perfect for Takua cosplay. Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 4, 2015 Author Share Posted June 4, 2015 I'll be using a Le-Koro shield Quote Link to comment Share on other sites More sharing options...
Owlexander Posted June 4, 2015 Share Posted June 4, 2015 I'll be using a Le-Koro shield I dunno... I was always a fan of the Wind Flyers... :3 Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
evil_jaga_genius Posted June 4, 2015 Share Posted June 4, 2015 To minimize the face-being-deformed factor of being hit with a basketball full of sand, could you fill one half with sand and half with air? Like how you sometimes do with water balloons? Quote Avatar by Nicholas Anderson (NickonAquaMagna)My blog: The Jaga's Nest Link to comment Share on other sites More sharing options...
Irrie Posted June 4, 2015 Share Posted June 4, 2015 To minimize the face-being-deformed factor of being hit with a basketball full of sand, could you fill one half with sand and half with air? Like how you sometimes do with water balloons?Would that unbalance how it moves in the air if the weight was concentrated on one side? Quote bZpOwEr Link to comment Share on other sites More sharing options...
Owlexander Posted June 4, 2015 Share Posted June 4, 2015 To minimize the face-being-deformed factor of being hit with a basketball full of sand, could you fill one half with sand and half with air? Like how you sometimes do with water balloons?Would that unbalance how it moves in the air if the weight was concentrated on one side? He doesn't mean physically in half, he means 50% air 50% sand, the sand would move all over the place. Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
Irrie Posted June 4, 2015 Share Posted June 4, 2015 To minimize the face-being-deformed factor of being hit with a basketball full of sand, could you fill one half with sand and half with air? Like how you sometimes do with water balloons?Would that unbalance how it moves in the air if the weight was concentrated on one side? He doesn't mean physically in half, he means 50% air 50% sand, the sand would move all over the place. Ah, silly me. However there's still an issue with pouring sand into a ball. If you were to cut it open and put it in there the ball would lose all of its air pressure. It would also have to be resealed so tightly that there aren't any excess holes in the ball itself. Quote bZpOwEr Link to comment Share on other sites More sharing options...
Owlexander Posted June 4, 2015 Share Posted June 4, 2015 (edited) I'm sure "How It's Made" would describe some complicated process on... (•_•) ( •_•)>⌐■-■ (⌐■_■) ...how it's made. http://www.myinstants.com/instant/yeah/ Edited June 4, 2015 by Forgeta 1 Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 4, 2015 Author Share Posted June 4, 2015 You can attach a funnel to a bike pump. As you pump air into the ball, pour the sand into the pump. This'll press the sand into the ball. 1 Quote Link to comment Share on other sites More sharing options...
Irrie Posted June 4, 2015 Share Posted June 4, 2015 I'm sure "How It's Made" would describe some complicated process on... (•_•) ( •_•)>⌐■-■ (⌐■_■) ...how it's made. http://www.myinstants.com/instant/yeah/2edgy4me You can attach a funnel to a bike pump. As you pump air into the ball, pour the sand into the pump. This'll press the sand into the ball.That might work, provided the hole in the ball is large enough for the sand grains to pass through. Quote bZpOwEr Link to comment Share on other sites More sharing options...
Owlexander Posted June 4, 2015 Share Posted June 4, 2015 There might just be a special ball built AROUND the sand if the sport ever gets popular enough. Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
Grungemeister Posted June 4, 2015 Share Posted June 4, 2015 There might just be a special ball built AROUND the sand if the sport ever gets popular enough.Yeah, it's called a medicine ball . Quote A RUDE AWAKENING - A Bionicle G1 continuation and video-game project(MUSIC COMPOSER) special thx to Inary the Gunhaver for my new username. Link to comment Share on other sites More sharing options...
Owlexander Posted June 4, 2015 Share Posted June 4, 2015 There might just be a special ball built AROUND the sand if the sport ever gets popular enough.Yeah, it's called a medicine ball . OHHH... so that's how they make those... and that's what a medicine ball is... ok... Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
Bfahome Posted June 4, 2015 Share Posted June 4, 2015 A ball half full of sand would also end up acting strangely. For one, it wouldn't roll very far because of the friction from the sand moving around inside. Quote Link to comment Share on other sites More sharing options...
Owlexander Posted June 4, 2015 Share Posted June 4, 2015 A ball half full of sand would also end up acting strangely. For one, it wouldn't roll very far because of the friction from the sand moving around inside. Perhaps full sand? Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 4, 2015 Author Share Posted June 4, 2015 A ball half full of sand would also end up acting strangely. For one, it wouldn't roll very far because of the friction from the sand moving around inside.Perhaps full sand?That was intended first. But someone suggested half full as to make less painful impacts Quote Link to comment Share on other sites More sharing options...
Owlexander Posted June 4, 2015 Share Posted June 4, 2015 A ball half full of sand would also end up acting strangely. For one, it wouldn't roll very far because of the friction from the sand moving around inside.Perhaps full sand?That was intended first. But someone suggested half full as to make less painful impacts Well, half sand would be a good idea in theory, though it would tend to flop around inside the ball... which I dunno if you've ever had to throw a ball half full of sand, but if you have, you would know how much it twists and turns in the air. But perhaps just a thick leather ball could simulate the weight and density of a ball full of sand? Also, wearing face gear is probably enough to make the impact easier to bear. Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 4, 2015 Author Share Posted June 4, 2015 A ball half full of sand would also end up acting strangely. For one, it wouldn't roll very far because of the friction from the sand moving around inside.Perhaps full sand?That was intended first. But someone suggested half full as to make less painful impactsWell, half sand would be a good idea in theory, though it would tend to flop around inside the ball... which I dunno if you've ever had to throw a ball half full of sand, but if you have, you would know how much it twists and turns in the air. But perhaps just a thick leather ball could simulate the weight and density of a ball full of sand? Also, wearing face gear is probably enough to make the impact easier to bear.Leather would work Also we should have the head gear look like kanohi Quote Link to comment Share on other sites More sharing options...
Irrie Posted June 4, 2015 Share Posted June 4, 2015 A ball half full of sand would also end up acting strangely. For one, it wouldn't roll very far because of the friction from the sand moving around inside.Perhaps full sand? That was intended first. But someone suggested half full as to make less painful impacts Well, half sand would be a good idea in theory, though it would tend to flop around inside the ball... which I dunno if you've ever had to throw a ball half full of sand, but if you have, you would know how much it twists and turns in the air. But perhaps just a thick leather ball could simulate the weight and density of a ball full of sand? Also, wearing face gear is probably enough to make the impact easier to bear. Leather would work Also we should have the head gear look like kanohi I'd suggest starting with paintball headgear. I know that some companies make custom designed paintball face masks such as this one:I think that one could request one of them to make one that's shaped like their Kanohi of choice. I don't know how much this kind of thing cost, tho. Quote bZpOwEr Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 4, 2015 Author Share Posted June 4, 2015 Seems good. This is going well so far 1 Quote Link to comment Share on other sites More sharing options...
Owlexander Posted June 5, 2015 Share Posted June 5, 2015 My Kanohi of choice would be Miru... favorite Kanohi right thar. :3 Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
Grungemeister Posted June 5, 2015 Share Posted June 5, 2015 I looked up the paintball masks, and they run about $170. If they can make a Guy-Man mask, they can make Kanohi http://www.onimarushop.com/270611_10151023515041567_812358504_n.jpg Quote A RUDE AWAKENING - A Bionicle G1 continuation and video-game project(MUSIC COMPOSER) special thx to Inary the Gunhaver for my new username. Link to comment Share on other sites More sharing options...
Owlexander Posted June 5, 2015 Share Posted June 5, 2015 I looked up the paintball masks, and they run about $170. If they can make a Guy-Man mask, they can make Kanohi http://www.onimarushop.com/270611_10151023515041567_812358504_n.jpg Awesome... gonna look sick in my Gold Miru... Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
Irrie Posted June 5, 2015 Share Posted June 5, 2015 Shouldn't be too hard to get them to make a black Kaukau, seeing that most paintball masks already have a visor. Only problem is the cost, I'll have to see how much I have after I buy the summer wave. 1 Quote bZpOwEr Link to comment Share on other sites More sharing options...
Grungemeister Posted June 5, 2015 Share Posted June 5, 2015 Personally, I'd custom-mold a Kakama if I could. The Kakama is my all time favorite G1 mask. 1 Quote A RUDE AWAKENING - A Bionicle G1 continuation and video-game project(MUSIC COMPOSER) special thx to Inary the Gunhaver for my new username. Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 6, 2015 Author Share Posted June 6, 2015 I'll have a Huna. But make it out of wood rather than what a normal paintball mask would be made. I'd leave it unpainted to give it the natural tan color. We can also name the tournaments after the masks of power: Time - Regionallife - StateCreation - National Quote Link to comment Share on other sites More sharing options...
Irrie Posted June 6, 2015 Share Posted June 6, 2015 I'll have a Huna. But make it out of wood rather than what a normal paintball mask would be made. I'd leave it unpainted to give it the natural tan color. We can also name the tournaments after the masks of power: Time - Regionallife - StateCreation - NationalThat sounds like a good idea. But we'd somehow need to make sure that each region and state had the same number of contestants, otherwise it would unbalance the fairness of the tournaments. 1 Quote bZpOwEr Link to comment Share on other sites More sharing options...
Owlexander Posted June 6, 2015 Share Posted June 6, 2015 If the competition will be this big (national, regional, etc.) with so few players on a team, this will be the most competitive sport of all time. Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 6, 2015 Author Share Posted June 6, 2015 Well despite it being only two players on the field at once per team, there's no limit to the amount of backup players. Extra offense and defense if one player is injured or too exhausted to continue. Quote Link to comment Share on other sites More sharing options...
Grungemeister Posted June 6, 2015 Share Posted June 6, 2015 I'll have a Huna. But make it out of wood rather than what a normal paintball mask would be made. I'd leave it unpainted to give it the natural tan color. We can also name the tournaments after the masks of power: Time - Regionallife - StateCreation - NationalI disagree with this. SOLID COPPER Hunas and Komaus as trophies. Quote A RUDE AWAKENING - A Bionicle G1 continuation and video-game project(MUSIC COMPOSER) special thx to Inary the Gunhaver for my new username. Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 6, 2015 Author Share Posted June 6, 2015 I'll have a Huna. But make it out of wood rather than what a normal paintball mask would be made. I'd leave it unpainted to give it the natural tan color. We can also name the tournaments after the masks of power: Time - Regionallife - StateCreation - NationalI disagree with this. SOLID COPPER Hunas and Komaus as trophies.Nono, for trophies we can have the Vahi, Ignika, and Mask of Creation. And they can even be worn. Extra gloat points. Quote Link to comment Share on other sites More sharing options...
Grungemeister Posted June 6, 2015 Share Posted June 6, 2015 I'll have a Huna. But make it out of wood rather than what a normal paintball mask would be made. I'd leave it unpainted to give it the natural tan color. We can also name the tournaments after the masks of power: Time - Regionallife - StateCreation - NationalI disagree with this. SOLID COPPER Hunas and Komaus as trophies.Nono, for trophies we can have the Vahi, Ignika, and Mask of Creation. And they can even be worn. Extra gloat points. In-story, there were copper Hunas and Komaus as trophies. There were set forms as well, and they're pretty rare. Quote A RUDE AWAKENING - A Bionicle G1 continuation and video-game project(MUSIC COMPOSER) special thx to Inary the Gunhaver for my new username. Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 6, 2015 Author Share Posted June 6, 2015 I'll have a Huna. But make it out of wood rather than what a normal paintball mask would be made. I'd leave it unpainted to give it the natural tan color. We can also name the tournaments after the masks of power: Time - Regionallife - StateCreation - NationalI disagree with this. SOLID COPPER Hunas and Komaus as trophies.Nono, for trophies we can have the Vahi, Ignika, and Mask of Creation. And they can even be worn. Extra gloat points.In-story, there were copper Hunas and Komaus as trophies. There were set forms as well, and they're pretty rare.Ooh yeeaaahhhh I completely forgot about that! That can work then 1 Quote Link to comment Share on other sites More sharing options...
Owlexander Posted June 6, 2015 Share Posted June 6, 2015 I'll have a Huna. But make it out of wood rather than what a normal paintball mask would be made. I'd leave it unpainted to give it the natural tan color. We can also name the tournaments after the masks of power: Time - Regionallife - StateCreation - NationalI disagree with this. SOLID COPPER Hunas and Komaus as trophies.Nono, for trophies we can have the Vahi, Ignika, and Mask of Creation. And they can even be worn. Extra gloat points.In-story, there were copper Hunas and Komaus as trophies. There were set forms as well, and they're pretty rare.Ooh yeeaaahhhh I completely forgot about that! That can work then Then when you win, you can use the mask you win as protection in the next game. :3 Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 6, 2015 Author Share Posted June 6, 2015 That'll be nice. Though a tan huna is still my favorite. I'll stick to being the team medic, and only going on the field as a last resort. My immortality makes me a pain to get off the field XD Quote Link to comment Share on other sites More sharing options...
Owlexander Posted June 6, 2015 Share Posted June 6, 2015 (edited) That'll be nice. Though a tan huna is still my favorite. I'll stick to being the team medic, and only going on the field as a last resort. My immortality makes me a pain to get off the field XD Same here, only it's not being immoral, but most likely my body's condition as well by the time we get to do this. XP Miru Medic! Edited June 6, 2015 by Forgeta Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
CarumEsSarene Posted June 6, 2015 Author Share Posted June 6, 2015 That'll be nice. Though a tan huna is still my favorite. I'll stick to being the team medic, and only going on the field as a last resort. My immortality makes me a pain to get off the field XDSame here, only it's not being immoral, but most likely my body's condition as well by the time we get to do this. XP Miru Medic! Huna Medic On the field my nickname will be the Bloody Red Queen. Quote Link to comment Share on other sites More sharing options...
Owlexander Posted June 6, 2015 Share Posted June 6, 2015 That'll be nice. Though a tan huna is still my favorite. I'll stick to being the team medic, and only going on the field as a last resort. My immortality makes me a pain to get off the field XDSame here, only it's not being immoral, but most likely my body's condition as well by the time we get to do this. XP Miru Medic! Huna Medic On the field my nickname will be the Bloody Red Queen. Wonder what mine would be... *just imagines getting hit repeatedly in the face with ball, preventing it from hitting the goal* (I actually developed a strategy like that for dodgeball XD) Quote |"We are the Turaga of the new generation." ~OwlexanderYouTube - Imgur - Flickr - Bionicle RPG Chat Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.