Jump to content
Sign in to follow this  
Illuminatus

Separating Mata Eyes from Heads

Recommended Posts

I once read that removing the eye piece from a Mata head causes damage somehow? Can anyone tell me if that's true and which of the two parts gets damaged in the process?

 

I've done this to at least 18 heads (all Toa Mata, all Turaga and 6 additional pieces); when I inspected them, they appeared to be intact but I can't be sure.


$50 OR MORE FOR THIS CD! C4oo0TM.png $50 OR MORE FOR THIS CD!

Share this post


Link to post
Share on other sites

I've heard of people breaking them, but I've been separating and reattaching Mata eyes/heads for years and have never seen any damage or breakage. I know different people have different techniques; I assume some are more harmful than others.

  • Upvote 1

Share this post


Link to post
Share on other sites

I’ve never personally attempted it, but I’ve heard it’s far easier to damage parts than keep them intact (I have bought a grey Mata face piece off of Bricklink that looked like it had been forcefully separated, pitted and such). I swear I’ve seen a tutorial on how to do it safely, but I’m not sure where.

  • Upvote 1

My friend went to Po-Wahi and all I got was this lousy rock.

logowithbackgrounnd100.png

Blue sea...a Ruki leaps...the sound of water

Share this post


Link to post
Share on other sites

I don't remember where I saw it (it was probably here, like five years ago), but I remember someone had come up with a pretty simple, effective mechanism (consisting of LEGO) that could pop them out easily. Based on that (and the fact that many other people have been changing them out for a while), I'd say they're probably fine as long as there isn't, like, a visual defect after disconnecting them.

  • Upvote 2

Share this post


Link to post
Share on other sites

In my experience, they only get damaged if you do it like an idiot. When I bought separated Mata heads in bulk from Bricklink, most of them had a nick at the top of the head piece where someone clearly separated the pieces by prying them apart with a metal instrument. This is not the way to do it.

 

The best way is to use a Lego-made apparatus that gives you enough leverage to push/pull the pieces apart using force that is perpendicular to the interface between the two pieces. There is one device in particular that I'm thinking of, but I can't find it on Brickshelf at the moment. Even as a kid, I never damaged pieces using it.

 

  • Upvote 1

Share this post


Link to post
Share on other sites

In my experience, they only get damaged if you do it like an idiot. When I bought separated Mata heads in bulk from Bricklink, most of them had a nick at the top of the head piece where someone clearly separated the pieces by prying them apart with a metal instrument. This is not the way to do it.

 

The best way is to use a Lego-made apparatus that gives you enough leverage to push/pull the pieces apart using force that is perpendicular to the interface between the two pieces. There is one device in particular that I'm thinking of, but I can't find it on Brickshelf at the moment. Even as a kid, I never damaged pieces using it.

Is this what you were thinking of? It's the 2012 orange brick separator, and I've used them to separate those parts, too. I've also used the old construct method (here). Here is a more recent update that looks more stable.
  • Upvote 1

"You are an absolute in these uncertain times. Your past is forgotten, and your
future is an empty book. You must find your own destiny, my brave adventurer.
"
-- Turaga Nokama

nichijou2.jpg

Click here to visit my library!

Share this post


Link to post
Share on other sites

Thanks a lot for the info, you guys. I used a similar axle solution to separate the pieces in 2012 and they looked just fine.

 

Someone on Facebook once mentioned that a "stub" of sorts inevitably gets broken when separating the two pieces and I never found out what they were talking about.


$50 OR MORE FOR THIS CD! C4oo0TM.png $50 OR MORE FOR THIS CD!

Share this post


Link to post
Share on other sites

 

In my experience, they only get damaged if you do it like an idiot. When I bought separated Mata heads in bulk from Bricklink, most of them had a nick at the top of the head piece where someone clearly separated the pieces by prying them apart with a metal instrument. This is not the way to do it.

 

The best way is to use a Lego-made apparatus that gives you enough leverage to push/pull the pieces apart using force that is perpendicular to the interface between the two pieces. There is one device in particular that I'm thinking of, but I can't find it on Brickshelf at the moment. Even as a kid, I never damaged pieces using it.

Is this what you were thinking of? It's the 2012 orange brick separator, and I've used them to separate those parts, too. I've also used the old construct method (here). Here is a more recent update that looks more stable.

 

 

No to the first one, yes to the last two. I don't recommend prying them apart.

Share this post


Link to post
Share on other sites

I'm pretty sure you need to make a blood sacrifice to Quetzalcoatl for it to work, fam.

  • Upvote 1

Rule #1: Always listen to Kek.

Rule #2: If you break rule #1, kindly don't.

Rule #3: EVERYBODY TYPE IN THE CHAT "AVAK IS A STUPID TRIGGER"

Share this post


Link to post
Share on other sites

The first brick separator made by bzpower is by far the best.

 

But depending on the looseness of pieces i have been able to separate them with my fingers. better have a high pain tolerance with your thumbs.

Edited by Toa of Ice - 1987

 

qs3135.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...