Jump to content

J.A.F. Team

  • entries
    1,631
  • comments
    5,572
  • views
    563,721

Review: Gahlok Pen


xccj

2,383 views

There was some talk in the forums a while ago about the Bohrok pens, an abstract collectible item from the era of excessive Lego merchandising. In looking up some pictures, I discovered a relatively cheap copy of a Gahlok pen on BrickLink, and because I have no impulse control, I now own it. And since I previous wrote a review on the Lewa and Onua Mata pens, I decided to do the same with this one. So without further ado...

 

review-gahlok-pen-01.jpg

 

It seems like the standard pen case for the Lego pens at the turn of the millennium. (Although I guess it's missing the plastic backing that would hold the spare beads on display.) A cool design bit is that the top is somewhat shaped like a Bohrok faceplate.

 

review-gahlok-pen-02.jpg_thumb.jpg~review-gahlok-pen-03.jpg_thumb.jpg

(Click for larger images)

 

 

The leaflet shows off some of the other various pens, including the original Toa Mata pens, the rest of the Bohrok pens, and a collection of the Toa Nuva pens. (I have the masks from all the Mata pens, but I haven't found any of the Nuva pens. There are a few available online from ebay and such... but I think they're going for $40 to $60. So that's a no from me.) There are some quirky descriptions of the pens (with a tip to add them to your collection ASAP, subtle marketing there) as well as a bio for the Gahlok Bohrok. (Which sounds vaguely familiar, so it's a little more official than the Mata Bios on the previous pen leaflets.)

 

review-gahlok-pen-04.jpg

 

The full pen can hold about six beads, and comes with a handful of extras to let you customize the design. I mean, neat concept, but Lego played that out for a ton of different pens back in the day, so it's not exactly revolutionary here. The grip is kinda cool with the swirly blue design. Alas, the ink is long since dried up (it's been 16 years now) and I have yet to find a replacement cartridge. (I have looked through a few craft stores... if somebody more knowledgeable knows anything, please share, it would be kinda cool to make these pens usable again.) The main unique feature here is the Bohrok faceplate. Unfortunately, it's attached to the top of the pen (and as such to the pin that runs down the center of the entire thing) so you can't really use it to make a mini Bohrok. But it folds up and down nicely to cover the krana and keep it from falling out. (Kinda.)

 

review-gahlok-pen-05.jpg

 

You get 11 beads plus the mini krana. The cooler beads, IMO, are the printed ones. The giant black one with the Bionicle logo appears in all the Bionicle pens, as far as I can tell, but it's still a decent design. Then you've got some medium blue beads with the Bohrok symbol, Gahlok shield, and a silhouette of the Gahlok Va. Then there's a blue bead that has an outline of the Mata Nui island on one side, and the name spelt out on the other. The rest of the beads are generic filler, including a blue, orange, trans orange, and thin medium blue bead (the latter of which it still on the bar in the image above.) The last large bead is actually molded after the Bohrok limb piece, which is clever.

 

Of course, the beads are largely superficial decorations. Yes, they do roughly fit onto a system stud, but there's no real practical MOC use out of them. Instead, everybody's interested in the krana and the head bead it attaches to.

 

review-gahlok-pen-06.jpg

 

The head bead does attach to a minifig neck... kind of. It attaches as well as any of the other pen beads, which is to say barely. Unfortunately, while the original Toa Kanohi hung down and covered the neck gap, the krana does not. (The head bead also sticks out quite a bit in the back, making it even more awkward to place on a minifigure torso.)

 

review-gahlok-pen-07.jpg

 

The krana is a hard plastic orange Krana Yo (the tunneling mole krana, for those who haven't memorized the powers). It has a small pin connection that fits exclusively into the mouth of the head bead. It is too small to fit into a traditional system bar hole, but too large to fit into the small accessory holes seen in minifigure hairpieces. Basically, it's useless without the head bead to attach to. And the attachment is weak... I don't know if that has to do with age or not, but the clutch power is barely there.

 

review-gahlok-pen-08.jpg

 

It's not to say the head bead is completely worthless. It attaches firmly to a stud, so it would actually work nicely to incorporate a small krana into a system MOC. There's potential... but not enough for me to go and track down the other five Bohrok pens. :glare: Unfortunately, it looks like the Toa Nuva pens also have unique masks that clip to the same head bead, which means that making Toa Nuva minifigures using the pen masks does not seem like a feasible project either, even if the pens were moderately affordable.

 

So the pen is only sorta meh, and the beads and krana aren't quite as worthy as the Toa Mata pen masks. There's a nice nostalgia kick for those of us who grew up in the Bohrok saga, but honestly it's not a must-have collectible.

 

And standard disclaimer: the Toa Mata masks pictured are from the *spoiler* Toa Pens from 2001. The torso decals were done by Nuju Metru (I gave him a handful of collectible minifigs for them.) I already did a post about maybe getting a bunch of torsos printed on commission, but there was no interest and instead people just griped about my color choices.)

 

:music:

  • Upvote 4

3 Comments


Recommended Comments

just fyi clicking the thumbnails to the leaflet just links to the thumbnails, not to the larger images!

 

Wondering if you could come up with a more custom figure build that could use the Mata head pen beads as a head… Of course, the other possibility (since the stickers make these non-purist anyhow) could be to file down the neck stud of a blank minifigure torso.

Link to comment
just fyi clicking the thumbnails to the leaflet just links to the thumbnails, not to the larger images!Wondering if you could come up with a more custom figure build that could use the Mata head pen beads as a head… Of course, the other possibility (since the stickers make these non-purist anyhow) could be to file down the neck stud of a blank minifigure torso.

A while back, I actually did make a custom build for the Mata body, specifically Kopaka. Sadly, it was on the old forums, and I have no idea what happened to the pictures. They aren’t on my old brickshelf, and I’ve switched computers twice now.

Link to comment
Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...