I'm sure there's a way you can take it out......

I'm sure there's a way you can take it out......

Not without breaking the leg...

Put a rod through the hole there, and it should come out with a pull. Use a grey #3 so if that breaks (it shouldn't) you don't loose anything important.

 

But first use it in a MOC. This is your one chance to do something that will never be done again!

 

-CF

LEGO should really warn people about that...

 

 

-SZ-

 

Put a rod through the hole there, and it should come out with a pull. Use a grey #3 so if that breaks (it shouldn't) you don't loose anything important.

Tried that, the leg piece just got white, like plastic dos before it breaks.

But first use it in a MOC. This is your one chance to do something that will never be done again!

Ok, but first I'll mutilate the other leg so I can have two!

LEGO should really warn people about that...

Nah, only stupid people would need that.

Not without breaking the leg...

Never mind, found out that you were right.What are you going to do about it?

Not without breaking the leg...

Never mind, found out that you were right.

Did it yourself?

I guess you'll have to call Lego for replacements.

(sad thing is they're charging now....)

 

good luck

as far as MOCing, you could just only have one, and use it as a body or head or something.

 

-CF

I guess you'll have to call Lego for replacements.

(sad thing is they're charging now....)

Since when?

Use you teeth, bite it, and pull it out.

 

It should work, with 1 or 2 broken teeth.

 

~ Bioran

Use you teeth, bite it, and pull it out.

 

It should work, with 1 or 2 broken teeth.

 

~ Bioran

...I actually tried that before the plus rod...

I was able to get it out without the leg breaking, the other peice wasn't so lucky but Hey, it's not nearly as rare.

Try pushing the piece of handjoint that comes out the bottom.(Push it back up in opposite directio you pushed it in to ,maybe use something sharp or thin but strong to push it back through if it doesen't work by hand.)

Just break the hand joint. Find a good sharp blade and go to work at it. It might cost you a few blades, but I'm sure you can handle it.

 

-

Lol, lol, lol!!! XD

 

That's hilarious.

 

I would proibably get a #5 peice thingy mobab through the hand thing and then use ur feet to put ur weight against the Kongu leg and then pull hard.

 

-CK

I got a piece stuck by messing up on the instructions for one of the Vahki combiners. I got it out though. I forgot what it was...oh yeah! I put a 2+ Rod in the back of the Rahkshi body (where the 3+ Rod usually goes to make the gears turn). It was very smart, as well.

 

Good luck with your piece.

I got a piece stuck by messing up on the instructions for one of the Vahki combiners. I got it out though. I forgot what it was...oh yeah! I put a 2+ Rod in the back of the Rahkshi body (where the 3+ Rod usually goes to make the gears turn). It was very smart, as well.

 

Good luck with your piece.

Errm...how? I did that exact same thing before, with my Rahkshi, still haven't been able to fix it <<;

 

Anywho...wow, how'd you do that? and Why?

I got a piece stuck by messing up on the instructions for one of the Vahki combiners. I got it out though. I forgot what it was...oh yeah! I put a 2+ Rod in the back of the Rahkshi body (where the 3+ Rod usually goes to make the gears turn). It was very smart, as well.

 

Good luck with your piece.

Anywho...wow, how'd you do that? and Why?

By placing the socket joint, then pressing the two pieces against the ground. Why, because I'm stupid?