Vspinax

Something around 'portal' would be amazing! preferably a model of GLaDOS or something like that. Other than that, I'd like to see a Tardis.

They all look really cool! I do especially like the dual hammer for Golyo. I don't think the shoulders to the 'Shadow Toa' quite work out tough. I have treid myself using those hand pieces as shoulders, even around the same concept of an evil toa like him, but it doesn't seem to work in my opinion. Other than that I do like them, great job!

My personal favorite is with no doubt 10237 Tower of Orthnac. It is very fun to build, has a LOT of pieces and looks amazing with tons of detalis. It also has some cool minifigs and great rooms inside of the tower. the only negative thing I have to say about it, is the fact that it isn't a complete tower. The backside is open... However, that isn't visible if you display it with that side facing the wall, so overall it absoulutely fantastic!

Wow! such paint, very skills!

and BTW, I have over 200 hours in that 'awesome' game

Nuparu be like:

Haha! Maybe x)

I really like the Hero Factory bags. They are practical and easy to store.

1. Onua

2. Kopaka

3. Tahu

4. Pohatu

5. Lewa

6. Gali

I do love them all tough

Awesome!

I'm still using my Toa Nuva towel and my Toa Metru bedding. I wouldn't mind some new ones in addition to those

what about ''the complete collection'' og just ''the collection''

I am using the Onua Wallpaper on my School computer right now

do you think you could make like a picture with all of the Toa on?

They are awesome! Fantastic job!

I'l defenitly use them sometime

EDIT: on Onua it says Wisdom and srength? think you did a little mistake...

I think Bioseum or something would be cool.

Moderate for me. It aren't a secret, but since I newly started on a new school I don't go around and tell everyone. It is however displayed everywhere in my room, so if someone is visiting me they will find out

I am assuming you mean this piece?

If a piece has two colors, it usualy has it's own page on bricklink.

-

It's just a really good idea, so you really should keep it in mind.

And you're welcome! I'd keep him that way too.

omg the de-cluttered armpits make it look a whole lot better!

Thank you. I wouldn't have discovered that without the feedback I got so I'm really thankfull for that

 

 

"So yeah, I took Nuparu Mahri and turned up the awesomeness dial until it broke off. Whaddya guys think?"

 

I think that it definitely looks like a Toa of Earth who knows how to tinker, and that's Nuparu in a nutshell. For some reason, I just can't get over the amount of silver. It just looks too beautiful. I also like how you used some Nuparu Inika pieces in there. The whole thing is just so well-done.

 

I'm pretty sure Nuparu would have done this in the story, so great job!

Thank  you very much! When building it I built a basic black figure based on the Nuparu sets, and then I took all the silver pieces I could find and tried my best to mash all of them on him

 

 

 

And at last for everybody who 'complains' about the Onua claws and the other silver pieces. I took them off and I have to admit that he probably does look a lot bether without them, so thanks for that particular feedback!

pictures can be found HERE

 

-

You're welcome! And that's a pretty good method!

 

You know, I kinda agree with you on that part. He looks a lot more functional now.

 

I defenitly did work, so I'l keep that in mind for whatever I might build next 

and thanks, I'l probably keep him that way.

When responding to a few of theese, something went wrong and I din't have the time to fix it then, so I am replying to all now

well i love changing existing toa designs like that is the only thing im not terrible at when it comes to building bonkles.

i agree that its a bit overdone. i think everything looks great but the sides of his torso do look cluttered.

if you took off one or two of the sets of silver weapons under his armpits it would be easier to judge this design

Thanks! I didn't quite see the problem with the tools and claws, untill I tried taking them off and it turned out pretty good I think.(link to pictures at the end of this reply)

This is awesome. Nuparu would probably love to rebuild himself like that. The Mask of Stealth must be really convenient with that much metal.

Thanks! I think Nuparu would like that too, and the mask is probably very handy, yes

Wow I think this is pretty good! Definitely looks like a 'tank' version of Nuparu!

Thanks! that was my goal

"So yeah, I took Nuparu Mahri and turned up the awesomeness dial until it broke off. Whaddya guys think?"

 

I think that it definitely looks like a Toa of Earth who knows how to tinker, and that's Nuparu in a nutshell. For some reason, I just can't get over the amount of silver. It just looks too beautiful. I also like how you used some Nuparu Inika pieces in there. The whole thing is just so well-done.

 

I'm pretty sure Nuparu would have done this in the story, so great job!

Thank  you very much! When building it I built a basic black figure based on the Nuparu sets, and then I took all the silver pieces I could find and tried my best to mash all of them on him

And at last for everybody who 'complains' about the Onua claws and the other silver pieces. I took them off and I have to admit that he probably does look a lot bether without them, so thanks for that particular feedback!

pictures can be found HERE

-

 

 

I quite like it! You definitely have the armoured tank look right. A few things that could be improved would maybe be the arm proportions (they look a bit long?), the many blades/long silver pieces aligned with each other make it look a bit busy in the photo (that could just be the photo though) and those two blue connector pieces used on the silver Onua claws on the chest are bugging me.  Otherwise a nice version of Nuparu.

Thank you!

I have never thought about it, but yes, the arms looks a bit our of proportions (even tough they aren't any longer than Mahir Nuparu's arms). I’ll experiment with some other arms, see how that goes. Also I don't quite get it what you mean by him looking busy, but you mentioned it may be the photo, and I kind of have like a 3D model off him in my head... so...

and yes, the blue connector pieces is annoying, but I have ordered some gray ones

 

 

Hard to explain but I guess like when you first look at it, it takes a second to discern things and focus on each part of his structure? It kind of suits the style I guess though and I suspect it may very well be the photo.

 

EDIT: Looking through the full album more carefully, I think it's my eyes getting distracted by the Onua claws on the front but also seeing the silver blades behind those? They both serve a similar purpose but clutter up his armpits a bit - maybe try experimenting with smaller silver armour pieces where the Onua claws are? Like the Nuva shoulder guards or something else (I'm not sure what would fit or look good I'm not super good at this stuff   ).

 

I will try to do something about it since many points it out. I'll post a link here to the pictures when that is done.

Also, I will experiment with some smaller arms!

-

I just tried it, and it looks great!

The matoran who is wawing seems to never stop wawing for some reason tough, which looks a bit odd. also it was very laggy, but that is most likely my computer (it  is terrible).

but overall it was really cool, can't wait to see more! 

I quite like it! You definitely have the armoured tank look right. A few things that could be improved would maybe be the arm proportions (they look a bit long?), the many blades/long silver pieces aligned with each other make it look a bit busy in the photo (that could just be the photo though) and those two blue connector pieces used on the silver Onua claws on the chest are bugging me. Otherwise a nice version of Nuparu.

Thank you!

I have never thought about it, but yes, the arms looks a bit our of proportions (even tough they aren't any longer than Mahir Nuparu's arms). I’ll experiment with some other arms, see how that goes. Also I don't quite get it what you mean by him looking busy, but you mentioned it may be the photo, and I kind of have like a 3D model off him in my head... so...

and yes, the blue connector pieces is annoying, but I have ordered some gray ones

-

Wow. Just wow.

Thx!

Looks way overdone, too many tubes, the Onua claws stick out a lot and the hordika chest armor is too wide to be a lower leg armor piece

Most of the tubes are to cover axles, but not all of them so I defenitly see your point. I don't quite see the problem with the claws and the hordika chest armor tough, but thanks for your opinion.

He's certainly an engineer, not a poet! That's a lot of armor, but does he have Onua and Gali claws in his armpits?

Yes. I don't know why, but I think it looks cool.

-

Today I built a new MOC! It it's Toa Nuparu, just with a lot of new armor and new tools. I builded it around the idea of making a very 'tank' version of Toa Mahri Nuparu and I am pretty happy with the result! 

http://i.imgur.com/gZyPewx.png

A few more pictures with different poses and from different angles can be found HERE!
Please tell me what you think of it, and give me a feedback!
 
-

Edit: Image linked; please keep posted images in BBC to around 100 kB!

-Wind-

Turtles!

I like the big Toa Mata hands, mostly because they just look freakin awesome! But for holding weapons and other tools the Toa Nuva must have the best hands.

 

 

I can't make cool poses, since my room is freaking tiny, and there is baerly room for the sets at all...

I could post some pcitures even tough my collection aren't quite complete yet

 

 

My mask collection, obviously. the ones under are spare masks, and the guy to the right is a MOC ^

Where did you get those neon Mata arms/legs?

Thoose are just lime green with green neon studs in the pin holes