Bricknave Posted January 6, 2015 Share Posted January 6, 2015 Everyone and their Turaga has rebuilt at least one of the original six at some point in their lives. I present to you my rebuild of 2001 Lewa, inspired by the first wave of 2015: The first wave of 2015 has reconciled functionality with pose-ability. I wanted to see if I could import this method to a 2001 model. There were several variations during the design phase, but this is what I settled on: If only ... If only .. They had solved the problem of the Falling Arm in 2001. Or in 2003, when they had access to axle-pins with friction. Oh well, the past is the past. This is 2015. In addition to solving the problem of the Falling Arm, I added some extra pose-ability. He is now more like the CGI Lewa on advertisements. I almost used the asymmetrical arms, but they were too asymmetrical for my tastes. His left arm looked lonely, so I gave him a little shield. It isn't as effective as Kopaka's, but it is much lighter and easier to swing on vines with. I'm happy to read your thoughts / suggestions / methods of solving the problem of the Falling Arm. 3 Quote Link to comment Share on other sites More sharing options...
Makuta Luroka Posted January 6, 2015 Share Posted January 6, 2015 what is the deal with his hips? Quote Link to comment Share on other sites More sharing options...
The 1st Shadow Posted January 6, 2015 Share Posted January 6, 2015 what is the deal with his hips?I think they're attached to something like a lightsaber blade piece. Maybe one of those flex tubes cut to 5x length. Anyway, looks like a good modification to the figure. I've been contemplating ways to give the Mata some friction, as well, and it looks like you beat me to it. Quote ~Your friendly, neighborhood Shadow ~Credit for Avatar and Banner goes to NickonAquaMagna~ Link to comment Share on other sites More sharing options...
Bricknave Posted January 7, 2015 Author Share Posted January 7, 2015 what is the deal with his hips? what is the deal with his hips?I think they're attached to something like a lightsaber blade piece. Maybe one of those flex tubes cut to 5x length. Anyway, looks like a good modification to the figure. I've been contemplating ways to give the Mata some friction, as well, and it looks like you beat me to it. Correctomundo, it's a lightsaber blade / bar 4x! Getting it in made a loud noise, just so you know. Thanks! I'm sure someone, somewhere, has beat me to adding friction. Quote Link to comment Share on other sites More sharing options...
Ghidora131 Posted January 7, 2015 Share Posted January 7, 2015 It's being held together by imagination. Nice job, though. Something about it doesn't look right, but it's better than I can do. Quote Link to comment Share on other sites More sharing options...
Nidhiki of the Shadows Posted January 7, 2015 Share Posted January 7, 2015 Huh, pretty cool. Doesn't look like much at first glance but I really respect the additional points of articulation you subtly added. Barely changes the sets aesthetics... but completely changes the functionality. -NotS Quote Link to comment Share on other sites More sharing options...
Zeb Posted January 10, 2015 Share Posted January 10, 2015 Huh, pretty cool. Doesn't look like much at first glance but I really respect the additional points of articulation you subtly added. Barely changes the sets aesthetics... but completely changes the functionality. -NotSAgreed. I kind of wish the hands were Dark Green (Mata Green/Classic Green), but other than that, this is a nice modification! There's actually an easier way to add friction to the back gear, though you lose the head articulation: Take the axle that sticks all the way through the neck and replace it with a 4-length axle. This allows the control gear to still spin the inner gears, but now the axle doesn't stick into the neck. Stick a friction half-pin/half-axle into the now-open hole in the neck. Stick a gear on it. This will add friction to both the one-arm and two-arm gear systems. If you want head articulation, however, you can't use this method. Quote The artist formerly known as ŜﮞρЄЯ־GЄNіﮞŜ־CЯЄ▲Ŧ۞Я BBC#69 Entry: Roodaka - Master of Manipulation BFTGM entries: Zigben · Ventox · Deflecto “Hail Denmark.” Link to comment Share on other sites More sharing options...
Bricknave Posted January 10, 2015 Author Share Posted January 10, 2015 It's being held together by imagination. Nice job, though. Something about it doesn't look right, but it's better than I can do. Thanks! Huh, pretty cool. Doesn't look like much at first glance but I really respect the additional points of articulation you subtly added. Barely changes the sets aesthetics... but completely changes the functionality. -NotS Thanks! I was going for functionality. Huh, pretty cool. Doesn't look like much at first glance but I really respect the additional points of articulation you subtly added. Barely changes the sets aesthetics... but completely changes the functionality. -NotSAgreed. I kind of wish the hands were Dark Green (Mata Green/Classic Green), but other than that, this is a nice modification! There's actually an easier way to add friction to the back gear, though you lose the head articulation: Take the axle that sticks all the way through the neck and replace it with a 4-length axle. This allows the control gear to still spin the inner gears, but now the axle doesn't stick into the neck. Stick a friction half-pin/half-axle into the now-open hole in the neck. Stick a gear on it. This will add friction to both the one-arm and two-arm gear systems. If you want head articulation, however, you can't use this method. Thanks! I thought the same thing after taking pictures. I have 2 shoulder/hip/"hand" ball sockets in normal green, but I felt like using the lime green hand-hands instead. Unfortunately I don't have them in normal green. I'll have to try that method out for fun sometime! Quote Link to comment Share on other sites More sharing options...
Mr. Cup of Fail Posted January 11, 2015 Share Posted January 11, 2015 It's pretty good but I dislike the hands, but that maybe just me Quote My Topics MOCs: Construct-a-Astronaut __________________________________________________ Find Me On Flickr Twitter Youtube Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.