AdaptingChaos Posted January 4, 2015 Share Posted January 4, 2015 So...just got two protectors today. You get 13 studs for the gun right? I double stacked them so they are heavier and easier to find. This modification limits the range on them by making the ammo heavier, but it is also easier to find due to being a bigger element that reflects light.A helpful trick for keeping track of ammo is to use fluorescent studs (like the Trans. Bright Green ones from the Protector of Jungle, the Trans. Fluor. Reddish Orange ones from the Protector of Fire, or the Trans. Fluor. Green ones from the Protector of Stone). With those, if one gets lost in a carpet or such, you can use a blacklight to make them glow brightly against their surroundings. Mind linking these pieces on Bricklink? I cant seem to find them somehow? And thanks for this tip! It will hopefully be very useful (although I dont plan to shoot my Protectors guns anytime soon.) Link to comment Share on other sites More sharing options...
Lyichir Posted January 4, 2015 Share Posted January 4, 2015 So...just got two protectors today. You get 13 studs for the gun right? I double stacked them so they are heavier and easier to find. This modification limits the range on them by making the ammo heavier, but it is also easier to find due to being a bigger element that reflects light. A helpful trick for keeping track of ammo is to use fluorescent studs (like the Trans. Bright Green ones from the Protector of Jungle, the Trans. Fluor. Reddish Orange ones from the Protector of Fire, or the Trans. Fluor. Green ones from the Protector of Stone). With those, if one gets lost in a carpet or such, you can use a blacklight to make them glow brightly against their surroundings. Mind linking these pieces on Bricklink? I cant seem to find them somehow? And thanks for this tip! It will hopefully be very useful (although I dont plan to shoot my Protectors guns anytime soon.) Here's the piece. The most common fluorescent colors, by Bricklink name, are Trans-Bright Green, and Trans-Neon Green, Trans-Neon Orange. Trans-Orange is also mildly fluorescent but isn't used in any of the Protectors. So are Trans-Medium Blue and Trans-Neon Yellow, but those are exceedingly rare compared to the aforementioned colors (the latter especially) so I wouldn't recommend using them as ammo no matter how careful you are with them. 2 Formerly Lyichir: Rachira of Influence Aanchir's and Meiko's brother Link to comment Share on other sites More sharing options...
fishers64 Posted January 5, 2015 Share Posted January 5, 2015 I think the easiest way to avoid losing ammo would be to take the ammo off the gun. That way if you accidentally trip the mechanism, nothing gets launched because there's nothing on the gun. 3 Hero Factory RPG | Bionicle Mafia XXIX: Storyline & Theories Link to comment Share on other sites More sharing options...
TommyG Posted January 15, 2015 Share Posted January 15, 2015 Never ever ever. The set MUST be exactly as pictured.You mean the pictures that sometimes have slightly different construction? Let's see, Jaller Mahri has his "crab-backpack" with his remaining pieces (albeit strangely) put on his back for swapping out modes (Crab on back - Crab & Cordak on Back - Normal Mode), Nuparu Mahri has more dark grey and is going to have a back weapons mod for his shield and Aqua Blaster Blade and Hewkii has his proportions improved, a hand, his colour problems fixed and his Cordak on top of his arm (as well as another "mask spike"), but other than those and slight things with the rest and Nuva, can't think of much. Pre-forums purge sig kept for historical purposes: Some cool Bionicles are the combiners. Example: Toa Jovan I've built a Krahka with 5 Toa Metru & Toa Norik, adding parts I needed to Norik. It needs 11 blue pieces (the ones that have +&O ends) but there's only 10 in all the Toa Metru sets. Do I have to attach her launcher to her arm? Please PM me if you can help me. http://www.bzpower.com/forum/index.php?showtopic=309724 Link to comment Share on other sites More sharing options...
Hasreadit Posted January 15, 2015 Share Posted January 15, 2015 I just can't change sets. How they look in the catalog picture is how they'll be in real life for me. The only time I'll ever change a set is if I don't think it's worth selling and then I'll make it into an MOC... Link to comment Share on other sites More sharing options...
Deadalus Posted January 15, 2015 Share Posted January 15, 2015 (edited) Aside from given them articulated fingers, I've tweaked most of them.- Gali and Kopaka are untouched- Modded Lewa so that he has full movement in his neck/head - Still tweaking Tahu. I wanted to make some changes to his legs because they look pretty bad, bland, and extremely hollow in the back.>>> Removed one pair of extensions on his legs (the ones that connect to his hips)>>> I used this Chima piece I found online to replace the gold armor on his shoulders and hips: http://brickset.com/parts/6075042>>> Took one pair of these (http://brickset.com/parts/design-19087) and added them to the front on his shins.>>> I plan to fill out the cavities behind his shins with either red or trans orange shells Doing a configuration similar to Metalbeard's hand to give Onua claws. I'm still waiting for the parts, but here's what Metalbeard's hand looks like on Onua's arm.http://www.brickshelf.com/gallery/Xia-Nui/Bionicle-Pics/onua_prototype.jpg Still messing around with Pohatu. I couldn't find a way to replicate his original geared kick/bottom heaviness without the design looking atrocious.http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6214042 Edited January 15, 2015 by Deadalus 1 Link to comment Share on other sites More sharing options...
Blueblur21 Posted January 17, 2015 Share Posted January 17, 2015 Never ever ever. The set MUST be exactly as pictured.Exactly. I prefer to have my sets 'official'. 1 Link to comment Share on other sites More sharing options...
Xabla Posted January 17, 2015 Share Posted January 17, 2015 I usually don't modify sets, but I also put a pin on the back of sets for a weapon holder. It is always necessary to do this for me. cringe Link to comment Share on other sites More sharing options...
AdaptingChaos Posted January 17, 2015 Share Posted January 17, 2015 Aside from given them articulated fingers, I've tweaked most of them.- Gali and Kopaka are untouched- Modded Lewa so that he has full movement in his neck/head - Still tweaking Tahu. I wanted to make some changes to his legs because they look pretty bad, bland, and extremely hollow in the back.>>> Removed one pair of extensions on his legs (the ones that connect to his hips)>>> I used this Chima piece I found online to replace the gold armor on his shoulders and hips: http://brickset.com/parts/6075042>>> Took one pair of these (http://brickset.com/parts/design-19087) and added them to the front on his shins.>>> I plan to fill out the cavities behind his shins with either red or trans orange shells Doing a configuration similar to Metalbeard's hand to give Onua claws. I'm still waiting for the parts, but here's what Metalbeard's hand looks like on Onua's arm.http://www.brickshelf.com/gallery/Xia-Nui/Bionicle-Pics/onua_prototype.jpg Still messing around with Pohatu. I couldn't find a way to replicate his original geared kick/bottom heaviness without the design looking atrocious.http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6214042Awesome modifications! Link to comment Share on other sites More sharing options...
Arzeron Posted January 19, 2015 Share Posted January 19, 2015 I wasn't satisfied with Pohatu's poor excuse for a knife, so I gave him a new one I had lying around. That's a knife! I was surprised with how the Lewa Nuva blade just so happened to match Pohatu's armor, I feel like I lucked out there. I also added the leftover spike pieces from Team Straya Stone to the Lord of Skull Spiders. I don't have a picture of him readily available at the moment. 1 "Child of Dunwich riseYou have your father's eyesC h i l d o f D u n w i c h r i s eEnd the world that you despise" Link to comment Share on other sites More sharing options...
Hasreadit Posted January 19, 2015 Share Posted January 19, 2015 I wasn't satisfied with Pohatu's poor excuse for a knife, so I gave him a new one I had lying around. That's a knife! I was surprised with how the Lewa Nuva blade just so happened to match Pohatu's armor, I feel like I lucked out there. I also added the leftover spike pieces from Team Straya Stone to the Lord of Skull Spiders. I don't have a picture of him readily available at the moment.I have an extra Lewa knife in that color too! Thanks for showing that improvement! Link to comment Share on other sites More sharing options...
DuplexBeGreat Posted January 19, 2015 Share Posted January 19, 2015 Replaced Stars Takanuva's mask, shoulder armor, and chest armor with gold equivalents from the 03 set. 1 idk man Link to comment Share on other sites More sharing options...
Jacks Posted January 19, 2015 Share Posted January 19, 2015 (edited) I don't think there are any sets that I haven't modified It's also very bizarre for me to see multiple people citing perfectionism as their reasons for adamantly never changing sets, because I too am a raging perfectionist, and my perfectionism is the very reason I HAVE to modify. There are always so many little things the designers could have done differently, and for some reason just didn't, that would make each set so much better. And on occasion, it's not-so-little things -- I ended up having to rebuild Lesovikk with a custom torso and entirely different arm configurations, feet, and sword before I was satisfied with him. I've already got blueprints in my head for alterations to any of the 2015 Toa I can get my hands on. Edited January 20, 2015 by Junkbot Master of Trash 3 ------------------------------------- ------------------------------------- Rate The Song Above You Link to comment Share on other sites More sharing options...
32one Posted January 20, 2015 Share Posted January 20, 2015 I don't think there are any sets that I haven't modified It's also very bizarre for me to see multiple people citing perfectionism as their reasons for adamantly never changing sets, because I too am a raging perfectionist, and my perfectionism is the very reason I HAVE to modify. There are always so many little things the designers could have done differently, and for some reason just didn't, that would make each set so much better. And on occasion, it's not-so-little things -- I ended up having to rebuild Lesovikk with a custom torso and entirely different arm configurations, feet, and sword before I was satisfied with him. I've already got blueprints in my head for alterations to any of the 2015 Toa I can get my hands on.Yeah, with the cost-cutting and other limitations that the set designers have to work with, I doubt that the final, official sets are anything but "perfect" or what the set designers would have ideally wanted. In my opinion, the only sets that look completely fine as by the instructions are the earlier and less complex sets such as the most 2001 sets and most matoran. Brutaka comes pretty close to looking perfect as well. Link to comment Share on other sites More sharing options...
Regal Posted January 29, 2015 Share Posted January 29, 2015 I took off the small grey gear with the blue pin on Tahu so I could swing his arms faster and I plan on replacing the yellow gear with a black one. I also took the black parts off his Magma Swords. Link to comment Share on other sites More sharing options...
Xabla Posted January 29, 2015 Share Posted January 29, 2015 Think about this: If you don't order on Bricklink, you must always destroy a set to edit another one. 2 cringe Link to comment Share on other sites More sharing options...
Akavakaku Posted January 30, 2015 Share Posted January 30, 2015 Unless you remove or switch pieces. 1 ( The bunny slippers hiss and slither into the shadows. ) -Takuaka: Toa of TimeWhat if the Toa you know best were not destined to be? Interchange: The epic begins Link to comment Share on other sites More sharing options...
Toa Doublebee Posted January 30, 2015 Share Posted January 30, 2015 (edited) when I first got them off Ebay a couple/half a dozen (I dont remember exactly when) years ago, I changed my Toa Mata set to give them matching arms.Last week I gave Pohatu (which I turned upside down) alot of armour, and I gave Onua full articulation.I did a bunch of small things to them aswell. Like giving Tahu an extra sword, and Giving Kopaka some extra armour.I left Gali completely unchanged though Other than my Mata. All other sets have been taken apart for mocs. Edit: I realized my Toa Mata-Nui and Kiina are also pretty much the same. I just tweed their armour and weapons a bit. Edited January 30, 2015 by Toa Doublebee Link to comment Share on other sites More sharing options...
Bryce304 Posted January 31, 2015 Share Posted January 31, 2015 I collect them, so I keep them the way the instructions say. Is it 2015 yet? Link to comment Share on other sites More sharing options...
ToaTatonio Posted January 31, 2015 Share Posted January 31, 2015 I put toa nuva shoulder armor on the short arms of toa hordika and removed the weapon on their short arm to make them look more like in the movie. My BZPRPG Profiles Johk - Gerox - Skebran - Samoh The Asylum: Nakton - Kuraz - Empu Link to comment Share on other sites More sharing options...
IXRollOutIX Posted January 31, 2015 Share Posted January 31, 2015 I usually never add parts that aren't already on the set and generally I only ever rearrange things to accommodate weapon storage. The one thing I've done that breaks the first rule was replacing the axle in the neck of all of my Toa Mata/Nuva with a length of pneumatic "flex" tubing so that they've all got head articulation. Link to comment Share on other sites More sharing options...
Katanga Posted February 1, 2015 Share Posted February 1, 2015 Like a few other people here, I typically swapped out the red size-2 axles and the blue rods for their black counter parts. I don't do this anymore since I've sort of grown to like the small breaks in the overall color scheme. For the most part though, my sets were either built as pictured or scraped for MOCs. My Bionicle Tumblr. New photos are uploaded daily! Link to comment Share on other sites More sharing options...
Hewkii8730 Posted February 1, 2015 Share Posted February 1, 2015 Any tweaks for metu nui toa gear box so that the ares can move freely PLEASE HELP Link to comment Share on other sites More sharing options...
Jacks Posted February 1, 2015 Share Posted February 1, 2015 You've got a couple options for that. The simplest would be to remove all the gears and attach the arms with these pieces. If you want a greater range of articulation, though, put one of these inside the gearbox and attach 3M axles through the holes, balljoints to the axles, sockets to the balljoints, and the arms to the sockets. The technique is used in this stop-motion film, and seeing it will probably give you a better sense of how it works than my convoluted description ------------------------------------- ------------------------------------- Rate The Song Above You Link to comment Share on other sites More sharing options...
hiddenderek Posted February 2, 2015 Share Posted February 2, 2015 (edited) Amy way to tweak lewa 2015 so that he can move his neck without getting rid of his high shoulders? I liked how his shoulders were so high, really distinguished him from the other sets. Edited February 2, 2015 by hiddenderek Link to comment Share on other sites More sharing options...
IXRollOutIX Posted February 2, 2015 Share Posted February 2, 2015 I find he doesn't look too bad if you just move his shoulders down by one pin and his 'tail' up. The collar still gives him a unique look and they even cover up the exposed ball joints on his chest better. The problem is that where his shoulders are mounted directly effects the mobility of his neck. I don't see many ways of keeping them up so high while still getting the full range of movement. Link to comment Share on other sites More sharing options...
hiddenderek Posted February 2, 2015 Share Posted February 2, 2015 I find he doesn't look too bad if you just move his shoulders down by one pin and his 'tail' up. The collar still gives him a unique look and they even cover up the exposed ball joints on his chest better. The problem is that where his shoulders are mounted directly effects the mobility of his neck. I don't see many ways of keeping them up so high while still getting the full range of movement.Yeah I just decided to put more of the armor pieces on his shoulders to keep that "bulked up" look. Link to comment Share on other sites More sharing options...
Karetao Posted February 3, 2015 Share Posted February 3, 2015 The most obvious one--giving heartlights to every character I possibly could. Those little round 1x1 studs come in real handy. Besides that, I haven't really done much to my sets. Maybe one or two here and there, but I can't remember what they are. That's a great idea! I should try that. To reply to the topic, personally I mix and match pieces from different Toa groups to get the limbs and bodies I want. I also find nail polish makes for good, metallic paint on the pieces (and can add glow-in-the-dark), and that way I can get them in any variety of colors I want - plus you can remove it fairly easily without damaging the actual part, should you want to change the color later. Just don't use acetone/nail polish remover, as it can react with plastic. Which I learned when a connector I accidently painted started smoking... 2 Link to comment Share on other sites More sharing options...
Petewa Posted February 3, 2015 Share Posted February 3, 2015 I messed with the plating on my Pohatu to make the color scheme make more sense, and I geared up his other arm, and I made his boomerangs into swords...of sorts, in the process I discovered that masks fit onto hands, and can be held, they sorta look like boxing gloves if you use two of the same kind, Mataru Nui, an Interactive Adventure Link to comment Share on other sites More sharing options...
The 1st Shadow Posted February 7, 2015 Share Posted February 7, 2015 Alright, in addition to the heartlight thing I mentioned before, I've recently picked up a few more of the '15 sets--namely, Onua and the Protector of Fire--who I decided had to be modified. PoF got longer legs, and had his shorter leg bones moved to his arms to provide elbows. Onua's lower legs have been switched out for the next size bone, to make him a bit taller. ~Your friendly, neighborhood Shadow ~Credit for Avatar and Banner goes to NickonAquaMagna~ Link to comment Share on other sites More sharing options...
Dallior Posted February 9, 2015 Share Posted February 9, 2015 Making a baby version of Protector of Jungle. HE'S SO CUTE "Remember when the comics forum had a lot of good stuff? Let's make that a thing again." -Kazi the Matoran Link to comment Share on other sites More sharing options...
Petewa Posted February 9, 2015 Share Posted February 9, 2015 Making a baby version of Protector of Jungle. HE'S SO CUTEThat sounds...adorable, 1 Mataru Nui, an Interactive Adventure Link to comment Share on other sites More sharing options...
Ford Posted February 9, 2015 Share Posted February 9, 2015 I decided to make small-sized Toa rather than dismantling them strictly for parts. This is so I have inspiration to keep them intact until the summer wave, in which I will make small-sized villains and then say that my life is complete. lull http://i.imgur.com/kbP5Svg.gifhttp://i.imgur.com/O8CcqC5.pnghttp://i.imgur.com/kbP5Svg.gif Link to comment Share on other sites More sharing options...
Petewa Posted February 9, 2015 Share Posted February 9, 2015 I decided to make small-sized Toa rather than dismantling them strictly for parts. This is so I have inspiration to keep them intact until the summer wave, in which I will make small-sized villains and then say that my life is complete. lull How tall are they in comparison to Toa Mata? Mataru Nui, an Interactive Adventure Link to comment Share on other sites More sharing options...
Ford Posted February 10, 2015 Share Posted February 10, 2015 I decided to make small-sized Toa rather than dismantling them strictly for parts. This is so I have inspiration to keep them intact until the summer wave, in which I will make small-sized villains and then say that my life is complete. lull How tall are they in comparison to Toa Mata? Either shorter or around the same size as the Toa Mata. I gauged their sizes to mimic their heights from the sets: Kopaka, Tahu, and Onua are all the same height, but slightly taller than Gali, Pohatu, and Lewa, who are also at the same height. http://i.imgur.com/kbP5Svg.gifhttp://i.imgur.com/O8CcqC5.pnghttp://i.imgur.com/kbP5Svg.gif Link to comment Share on other sites More sharing options...
Aanchir Posted February 10, 2015 Share Posted February 10, 2015 I decided to make small-sized Toa rather than dismantling them strictly for parts. This is so I have inspiration to keep them intact until the summer wave, in which I will make small-sized villains and then say that my life is complete. lull How tall are they in comparison to Toa Mata? Either shorter or around the same size as the Toa Mata. I gauged their sizes to mimic their heights from the sets: Kopaka, Tahu, and Onua are all the same height, but slightly taller than Gali, Pohatu, and Lewa, who are also at the same height. Technically speaking, if you want them to reflect the heights of the sets, Onua and Pohatu should be the shortest, Tahu and Kopaka the tallest, and Gali and Lewa in between. Latest MOC: PAIGE (Prototype Artificial Intelligence, Gynoid Expression) Link to comment Share on other sites More sharing options...
Xabla Posted February 10, 2015 Share Posted February 10, 2015 I decided to make small-sized Toa rather than dismantling them strictly for parts. This is so I have inspiration to keep them intact until the summer wave, in which I will make small-sized villains and then say that my life is complete. lull How tall are they in comparison to Toa Mata? Either shorter or around the same size as the Toa Mata. I gauged their sizes to mimic their heights from the sets: Kopaka, Tahu, and Onua are all the same height, but slightly taller than Gali, Pohatu, and Lewa, who are also at the same height. Technically speaking, if you want them to reflect the heights of the sets, Onua and Pohatu should be the shortest, Tahu and Kopaka the tallest, and Gali and Lewa in between. I thought Kopaka was always the tallest. cringe Link to comment Share on other sites More sharing options...
Aanchir Posted February 10, 2015 Share Posted February 10, 2015 I decided to make small-sized Toa rather than dismantling them strictly for parts. This is so I have inspiration to keep them intact until the summer wave, in which I will make small-sized villains and then say that my life is complete. lull How tall are they in comparison to Toa Mata? Either shorter or around the same size as the Toa Mata. I gauged their sizes to mimic their heights from the sets: Kopaka, Tahu, and Onua are all the same height, but slightly taller than Gali, Pohatu, and Lewa, who are also at the same height. Technically speaking, if you want them to reflect the heights of the sets, Onua and Pohatu should be the shortest, Tahu and Kopaka the tallest, and Gali and Lewa in between. I thought Kopaka was always the tallest. Kopaka's never been the tallest, at least not in the sets. The 2001 and 2002 sets were all more or less the same height except Pohatu and Onua, who were shorter than the others in both their Mata and Nuva forms. In the 2008 sets Kopaka was the third tallest, after Onua and Lewa. And in the 2015 sets, Kopaka is second tallest, after Tahu. Latest MOC: PAIGE (Prototype Artificial Intelligence, Gynoid Expression) Link to comment Share on other sites More sharing options...
Lyichir Posted February 10, 2015 Share Posted February 10, 2015 (edited) I decided to make small-sized Toa rather than dismantling them strictly for parts. This is so I have inspiration to keep them intact until the summer wave, in which I will make small-sized villains and then say that my life is complete. lull How tall are they in comparison to Toa Mata? Either shorter or around the same size as the Toa Mata. I gauged their sizes to mimic their heights from the sets: Kopaka, Tahu, and Onua are all the same height, but slightly taller than Gali, Pohatu, and Lewa, who are also at the same height. Technically speaking, if you want them to reflect the heights of the sets, Onua and Pohatu should be the shortest, Tahu and Kopaka the tallest, and Gali and Lewa in between. I thought Kopaka was always the tallest. Not really. Kopaka Mata and Kopaka Nuva were both the same height as Tahu, Gali, and Lewa (save for minute differences in the heights of their masks). Kopaka Phantoka was the same height as Lewa and actually SHORTER than Onua. EDIT: Disregard this comment. Aanchir is both more accurate and quicker to the punch. Edited February 10, 2015 by Lyichir Formerly Lyichir: Rachira of Influence Aanchir's and Meiko's brother Link to comment Share on other sites More sharing options...
Xabla Posted February 10, 2015 Share Posted February 10, 2015 I decided to make small-sized Toa rather than dismantling them strictly for parts. This is so I have inspiration to keep them intact until the summer wave, in which I will make small-sized villains and then say that my life is complete. lull How tall are they in comparison to Toa Mata? Either shorter or around the same size as the Toa Mata. I gauged their sizes to mimic their heights from the sets: Kopaka, Tahu, and Onua are all the same height, but slightly taller than Gali, Pohatu, and Lewa, who are also at the same height. Technically speaking, if you want them to reflect the heights of the sets, Onua and Pohatu should be the shortest, Tahu and Kopaka the tallest, and Gali and Lewa in between. I thought Kopaka was always the tallest. Not really. Kopaka Mata and Kopaka Nuva were both the same height as Tahu, Gali, and Lewa (save for minute differences in the heights of their masks). Kopaka Phantoka was the same height as Lewa and actually SHORTER than Onua. EDIT: Disregard this comment. Aanchir is both more accurate and quicker to the punch. Pohatu is tall this wave, right? cringe Link to comment Share on other sites More sharing options...
Recommended Posts