Toa Of Virtues Posted May 28, 2012 Share Posted May 28, 2012 (edited) Is it just me, or am I the only one who preffers the old hand molds to the new ones? While the new ones added a more lifelike quality to the sets, its connecting capibilities are poor compared to the old ones. You can't connect any of the weapons to it that meant to go over the hand a little, like Pridak's shark tooth blads, etc. There is also the old Toa-Mata two-fingered hands, and other titan hands. Opinions? Edited August 20, 2012 by Toa Of Virtues Quote Link to comment Share on other sites More sharing options...
Lyichir Posted May 29, 2012 Share Posted May 29, 2012 Is it just me, or am I the only one who preffers the old hand molds to the new ones? While the new ones added a more lifelike quality to the sets, its connecting capibilities are poor compared to the old ones. You can't connect any of the weapons to it that meant to go over the hand a little, like Pridak's shark tooth blads, etc. Opinions?That's more a result of those parts being designed for the old "Y-joint" hands rather than the newer ones. If the new hands had been introduced back in 2001, parts like the shark tooth blades would probably have been designed with those hands in mind. Quote Formerly Lyichir: Rachira of Influence Aanchir's and Meiko's brother Link to comment Share on other sites More sharing options...
Chols Posted May 29, 2012 Share Posted May 29, 2012 I say it depends on what you want to do with it. If you can use the new hands, they'll probably look better, but if you want to take advantage of the regular y-joint, then that would look better than the new hands.It's not like the new hands have displaced the old y-joint. Both pieces still exist, and even official Lego sets still use y-joints when needed (see: MTIS on Hero Factory 2.0). So there's no reason not to use whichever you want. Quote Latest MOC: Ol' Dusty Link to comment Share on other sites More sharing options...
Dralcax Posted May 29, 2012 Share Posted May 29, 2012 New hands look better on HF arms, but for Bionicle arms, you can't beat the Y-joint. Quote Link to comment Share on other sites More sharing options...
Aanchir Posted May 29, 2012 Share Posted May 29, 2012 I have been a big fan of both the four-fingered Glatorian hands and their new five-fingered Hero Factory replacements, but I see no reason it has to be an "either-or" situation. As Chols mentioned, some Hero Factory sets still use Y-joints as hands when those additional connection points are needed, and I certainly don't hesitate to use Y-joints as hands in my MOCs if I prefer a more imaginative weapon to a more lifelike appearance.There are also some weapons that don't work using classic Y-joints and do work with other hand pieces. FOr example, the hilt of Ackar's sword can't be held at a reasonable angle by a regular Y-joint unless the wrist is twisted unnaturally. Since neither style of fist have a "knuckle" that sticks out as far as the perpendicular connection point on a Y-joint, there are situations where the newer fist pieces are functionally superior, not just aesthetically superior.In other words, older Y-joints may be more versatile in some ways, but sets and MOCs that don't need the additional connection points don't need regular Y-joints, and regular Y-joints are still available for those that do need them. Quote Latest MOC: PAIGE (Prototype Artificial Intelligence, Gynoid Expression) Link to comment Share on other sites More sharing options...
Ballom Nom Nom Posted May 30, 2012 Share Posted May 30, 2012 The old hand pieces could be used for tons of situations, with around five different connection points. The new ones are lame fists that have only two connection points, and are hard to use for things other than hands. Old ones win by a massive amount in my book.~B~ Quote Link to comment Share on other sites More sharing options...
Scrash Posted May 30, 2012 Share Posted May 30, 2012 The old hand pieces could be used for tons of situations, with around five different connection points. The new ones are lame fists that have only two connection points, and are hard to use for things other than hands. Old ones win by a massive amount in my book.~B~Yeah, but is that not kind of the point of them? To be hands? As people have said, it's not like the traditional socket has been replaced (remolded, sure). Quote plop Link to comment Share on other sites More sharing options...
Ballom Nom Nom Posted May 30, 2012 Share Posted May 30, 2012 The old hand pieces could be used for tons of situations, with around five different connection points. The new ones are lame fists that have only two connection points, and are hard to use for things other than hands. Old ones win by a massive amount in my book.~B~Yeah, but is that not kind of the point of them? To be hands? As people have said, it's not like the traditional socket has been replaced (remolded, sure).No, they're used for so many other things, even as generic connection points on sets or MOCs. And the new socket is much less versatile, as it removed two of the better connection points (i.e. the possibility of placing axles through the socket hole).~B~ Quote Link to comment Share on other sites More sharing options...
Daiker Posted May 30, 2012 Share Posted May 30, 2012 (edited) It really depends to me. The new hand molds seem much more fitting to HF sets/creations than BIONICLEs. I guess it's their slight differences I think in proportion that affects it. However I see the y-joints as having always been BIONICLE's signature feature. If I had to choose between adding a new hand socket or a y-joint to a BIONICLE, it would definitely be the y-joint. I guess we've become more accustomed to it and now it seems more fitting. Edited May 30, 2012 by Daiker Quote Link to comment Share on other sites More sharing options...
Lyichir Posted May 30, 2012 Share Posted May 30, 2012 The old hand pieces could be used for tons of situations, with around five different connection points. The new ones are lame fists that have only two connection points, and are hard to use for things other than hands. Old ones win by a massive amount in my book.~B~Yeah, but is that not kind of the point of them? To be hands? As people have said, it's not like the traditional socket has been replaced (remolded, sure).No, they're used for so many other things, even as generic connection points on sets or MOCs. And the new socket is much less versatile, as it removed two of the better connection points (i.e. the possibility of placing axles through the socket hole).~B~...in exchange for making the previously fragile socket holes much sturdier. With the number of Y-joints I've lost even to careful, proper use, I think that's a worthy trade. Quote Formerly Lyichir: Rachira of Influence Aanchir's and Meiko's brother Link to comment Share on other sites More sharing options...
a goose Posted May 30, 2012 Share Posted May 30, 2012 I always prefer the Y-joints, really. They just have a more... BIONICLE-y feel, y'know?Unless I'm making a Glatorian or Agori, in which case the four-fingered hands are better. Quote [BZPRPG PROFILES] Nikarra - Kaelynn - Ronan - Muir - Donal - Aerus - Montague - Kira - Koura - Learu - Alteora - Fuacht - Caana - Nessen - Merrill Link to comment Share on other sites More sharing options...
Dralcax Posted May 30, 2012 Share Posted May 30, 2012 Only articulated fingers will ever justify the new fists. Otherwise, you could just use the old style, meaning two ways to hold, making it convinient to hold either a sword, a spear, or a shield. Guns might suit the new version, but come on, this is Lego we're talking about, meaning all projectile launchers have to be ridiculously oversized, save the Rhotuka and Kanoka, the former of which can't be aimed and the latter doesn't even go far. I mean, a gun shouldn't be bigger than the wielder's head *coughcordaklauncherscough*! Quote Link to comment Share on other sites More sharing options...
Meiko Posted June 1, 2012 Share Posted June 1, 2012 I prefer the new ones over the old ones, though I occasionally use simple Y-Joints as hands. I like the realistic qualities of the new ones, but the old ones still have their uses here and there. Quote -- Meiko - @georgebarnick LUG Ambassador and administrator at Brickipedia News reporter and database administrator at Brickset Administrator at BIONICLEsector01 DISCLAIMER: All opinions and contributions made under this account are based solely on my own personal thoughts and opinions, and in no way represent any of the above groups/entities. If you have any concerns or inquiries about the contributions made under this account, please contact me individually and I will address them with you to the best of my ability. Link to comment Share on other sites More sharing options...
<Reverb> Posted June 1, 2012 Share Posted June 1, 2012 Meh, I like they old ones. They give me a vibe of realistic. I also have WAY more old ones than new mold hand types. xD~Gravity Quote Link to comment Share on other sites More sharing options...
Peach 00 Posted June 1, 2012 Share Posted June 1, 2012 Although the new hand molds appealed to some because they were solid, I preferred the old design. I have a lot more of the older ones anyhow, lol. Quote On the day the wall came down / They threw the locks onto the ground And with glasses high / We raised a cry / For freedom had arrived On the day the wall came down / The ship of fools had finally run aground Promises lit up the night / Like paper doves in flight I dreamed you had left my side / No warmth, not even pride remained And even though you needed me / It was clear that I could not do a thing for you Now life devalues day by day / As friends and neighbors turn away And there's a change that even with regret / Cannot be undone Now frontiers shift like desert sands / While nations wash their bloodied hands Of loyalty, of history / In shades of grey I woke to the sound of drums / The music played, the morning sun streamed in I turned and I looked at you / And all but the bitter residues slipped away slipped away... Link to comment Share on other sites More sharing options...
MVahi13 Posted June 9, 2012 Share Posted June 9, 2012 Yeah, the old hands was better, the new ones just didn't seem the same to me. Quote Link to comment Share on other sites More sharing options...
Plague Posted June 12, 2012 Share Posted June 12, 2012 Well, the old 'hands' weren't really hands. But, they were a useful piece and functioned well as hands for BIONICLE sets. On the other hand ( cheesy pun! ) , the new hands released in the Glatorian sets were more lifelike. Some downsides are that some weapons cannot be connected in any way, and that these hand molds also have limited connection points.All in all, the old 'hands' are what BIONICLE will be remembered for, and are one of the most useful molds so far. Quote http://www.mocpages.com/home.php/67904 < My Mocpages! My first (and currently ONLY) MOC on BZP! > http://www.bzpower.c...?showtopic=5426 PLAGUEAvatar pic taken [and edited] by me. DON"T STEAL IT! Link to comment Share on other sites More sharing options...
Bfahome Posted June 12, 2012 Share Posted June 12, 2012 Personally I'm happy that we now have a variety of choices to pick from.If I want to give a figure a weapon like a staff where aesthetically it's better to have a clenched fist, I'll use the new hand mold.If I want to give the figure a more complex weapon that wouldn't fit on the fist or large talons that would be in place of the fist, I'll use the single socket joint mold.And if I don't want the figure to have a handheld weapon, I might use the single socket, pneumatic t-joint, and some Exo-Force robot arms to make hands with moveable fingers. This also works if you want to give them claws.The fist might not have the versatility of the single socket, but it's a good mold to have added into the mix. If it were replacing the single socket entirely I would have some issues with it, but since that piece is also used a number of other ways I don't think that's likely to ever happen. Quote Link to comment Share on other sites More sharing options...
The Swimming Beard Posted June 18, 2012 Share Posted June 18, 2012 I always preferred the Y-joints as hands. Quote "I pitea the fool!" (quote by Chro) 98.7% OF BZPOWER MEMBERS HAVEN'T SEEN MY BUCKET IF YOU ARE ONE OF THE 1.3% THAT HAS SEEN MY BUCKET, COPY THIS AND PASTE IT INTO YOUR SIGNATURE I MISS MY BUCKET Link to comment Share on other sites More sharing options...
Nuparu1995 Posted June 18, 2012 Share Posted June 18, 2012 I preferred the old ones. Less bulky, you know? Of course, you could never beat Hydraxon's fingers! Quote Nuparu1995 92% of teens have moved onto rap.If you are part of the 8% that still listen to real music, copy and paste this into your signature. R.I.P. - 7/20/2012 Link to comment Share on other sites More sharing options...
Toa Turing Posted June 21, 2012 Share Posted June 21, 2012 Personally, I like to use the Glatorian hands when I can. I don't really like the Hero Factory hands. Quote I really need a better signature. Link to comment Share on other sites More sharing options...
Overlord Posted June 27, 2012 Share Posted June 27, 2012 Wow, some divided opinions here.Personally, I just don't have enough colors/a large enough amount of the fist-type hands, whether Glatorian or Hero Factory, to use them in most MOCs. I actually like the fist-type hands well enough, but have all the wrong colors most of the time.~~ Quote "YOU'D THINK, FOR BEING A DEAD MAN, I'D BE MORE TRIUMPHANT THAN I AM." Link to comment Share on other sites More sharing options...
Aanchir Posted June 29, 2012 Share Posted June 29, 2012 Wow, some divided opinions here.Personally, I just don't have enough colors/a large enough amount of the fist-type hands, whether Glatorian or Hero Factory, to use them in most MOCs. I actually like the fist-type hands well enough, but have all the wrong colors most of the time.~~Well, I'm not sure what color MOCs you tend to make so have no idea what colors you find yourself needing, but the Hero Factory ones are on Pick-A-Brick in at least five colors. White, Bright Orange, and Bright Blue ones are available on Bricklink for slightly higher costs. Quote Latest MOC: PAIGE (Prototype Artificial Intelligence, Gynoid Expression) Link to comment Share on other sites More sharing options...
Overlord Posted June 29, 2012 Share Posted June 29, 2012 (edited) Wow, some divided opinions here.Personally, I just don't have enough colors/a large enough amount of the fist-type hands, whether Glatorian or Hero Factory, to use them in most MOCs. I actually like the fist-type hands well enough, but have all the wrong colors most of the time.Well, I'm not sure what color MOCs you tend to make so have no idea what colors you find yourself needing, but the Hero Factory ones are on Pick-A-Brick in at least five colors. White, Bright Orange, and Bright Blue ones are available on Bricklink for slightly higher costs. I should note that 1) I don't have a Bricklink account and 2) I rarely order from LEGO.com (let alone anywhere else) and usually forget to look at Pick-a-Brick when I do. It's a combination of inertia and paucity of personal collection that keeps me from bothering to use/get fist-type hands.Also, I prefer the BIONICLE type very slightly, but that's a different story.Thanks for the reminder though, I'd forgotten about Pick-a-Brick's selection. Maybe when I next order...EDIT: I'm not sure I'd spend that much on hand pieces either. :| Ah well, maybe trading will net me some.~ ~ Edited June 29, 2012 by Overlord Quote "YOU'D THINK, FOR BEING A DEAD MAN, I'D BE MORE TRIUMPHANT THAN I AM." Link to comment Share on other sites More sharing options...
CeeCee Posted June 30, 2012 Share Posted June 30, 2012 (edited) Im not a fan of the new ones. They look so babyish and child like. Much prefer the old ones.Fun Fact: The old hands look like Takuas Pakari from the MoL Edited June 30, 2012 by SamH1995 Quote Signature Guidelines: Avatar and signature total file size may not exceed 250 KB! Link to comment Share on other sites More sharing options...
WeatherDragon Posted June 30, 2012 Share Posted June 30, 2012 I like both, though I prefer the new hand molds because they look more realistic.But the old ones are awesome, too. Quote "Remember the Heart of NINJAGO."I might eat you if you get too close >:3 Link to comment Share on other sites More sharing options...
man774 Posted June 30, 2012 Share Posted June 30, 2012 the very first hands for the toa mata were the best IMO. What I wonder; however, is why they "filled in" the holes in 2008 of the y-joint. The new ones got on my nerves at first (every square socket peice i own is either brocken or cracked. Curse you squares!), then they used circle-sockets, which makes me happy(er). With the Y joint, you can use more things in 1 hand, and, as mentiond before, they can hold curvy parts. plus, they can make a 4-peice crossbow! Quote Link to comment Share on other sites More sharing options...
Liopleurodon Posted July 7, 2012 Share Posted July 7, 2012 I still like the old hands better. Quote Link to comment Share on other sites More sharing options...
dee.3x3 Posted July 8, 2012 Share Posted July 8, 2012 They're both pretty good, though sometimes the new hands look to big and bulky, and the Y-joints can be used in a multitude of poses. I find the preset fist of the new hand looks quite strange in certain poses, while the Y-joints look good doing anything (EG: Pointing at something). Quote Link to comment Share on other sites More sharing options...
metrunui955 Posted July 20, 2012 Share Posted July 20, 2012 I like the old hands better. Quote Link to comment Share on other sites More sharing options...
Akuna Toa of Sonics Posted July 20, 2012 Share Posted July 20, 2012 I like the old ones for basically everything. The new fist molds really only beat the old Y-hands when they're holding Thornax launchers, basic melee weapons, or Hero Factory weapons. Quote Does anyone want to play the Master Chief Collection with me? I'm trying to get a team going for ranked. PM for GT. Link to comment Share on other sites More sharing options...
PDPsi HAN Posted July 25, 2012 Share Posted July 25, 2012 While the new hands certainly look nice, Y joints allow for fingered hands and more connection points. A mix of both wouldn't hurt. Quote AΨ 94 Link to comment Share on other sites More sharing options...
ShadowBionics Posted July 26, 2012 Share Posted July 26, 2012 I see what you're saying, and true, you can't beat the y-joint piece (or "hip joint" as other fans called it in the old days), since they were originally used as hands in the older days of Bionicle. These new hands do add a but of realism to sets, but you're sort of limited on parts and weapons, depending on how you use them. Some parts like Pridak's shark tooth blades can't fit since they were made with the y-joint piece in mind.I do like the y-joint piece better in some bases, although again, it depends on the set and how I use it. In the case of Bionicle sets and MOCs, I'd prefer the y-joint/hip joint parts instead. Quote [flash=250,100]http://www.brickshelf.com/gallery/sprxtrerme/BANNERS/thornax.swf [Bionicle: Unsolved Mysteries] [The Knights of Terankos] [Miyaka The Blazing Wind] No, I didn't see you playing with your dolls again! Link to comment Share on other sites More sharing options...
BobaFett2 Posted August 10, 2012 Share Posted August 10, 2012 The new hands are definitely cool, but the unrealistic old hands have a classic feel. I don't like how they aren't fully compatible. Quote The Legend Lives... Link to comment Share on other sites More sharing options...
Linsanity Posted August 10, 2012 Share Posted August 10, 2012 I like the new ones because they look more realistic when they're holding a gun, sword, etc. Quote Link to comment Share on other sites More sharing options...
Solaris Magnus Posted August 13, 2012 Share Posted August 13, 2012 The Old ones were classic, and had so many uses. However the new ones make the sets post 2008 look a lot more realistic and lifelike. But i still gotta go with old style .-Star Quote Solaris Magnus. Formerly Starparu. Link to comment Share on other sites More sharing options...
Ektris Posted August 15, 2012 Share Posted August 15, 2012 I still love the classic "y-joint." Its versatility is simply awesome.But come on, who doesn't like hands that look like hands?~|ET|~ Quote E-T... Phone home. "He walks among us, but he is not one of us." Link to comment Share on other sites More sharing options...
Taipu1 Posted August 18, 2012 Share Posted August 18, 2012 I liked the original "Y-Joint", but not the remoulded one from '08. Those broke when you tried to forms chains with other Y-joints. I always use the original whenever possible, even over the few glatorian hands I have. I don't have enough of the new hands for them to look right amongst the rest of my MOCs and sets, and I also think the hands look odd still, and I just prefer the aesthetics of the Y-joint. Quote - Taipu1.HighFly MatoranShowdownBZPRPG ProfilesHave you seen my Blog? I understand if you haven't Link to comment Share on other sites More sharing options...
iPenguin Posted August 18, 2012 Share Posted August 18, 2012 I think the new hands looked nice on the glatorian/hf stuff while the old hands looked nice on the older sets. Quote Majhost sucks Link to comment Share on other sites More sharing options...
Protodite Karzahni Posted August 20, 2012 Share Posted August 20, 2012 While the old hands were more useful for all-round stuff, I think that the post-Glatorian look marvellous and really add a lifelike quality to the sets. Quote I wrote stories once. They were okay. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.