Wrinkledlion X Posted December 30, 2012 Posted December 30, 2012 What nonexistent pieces do you really wish existed? They can be functional pieces, or simply re-colors. I really want Mctoran pieces in different colors. A teal body and lime-green feet for Tamaru would be just magical. Why must so many of these characters be impossible to build? [bloog] [brickshelf] [This used to be my library but the link is broken]
Samus Aran-Bounty Hunter Posted December 30, 2012 Posted December 30, 2012 Well, one I know I've wanted many times before is a O connector that's only half thick on both sides. Total, it would be only 1 beam width long. Same for + connectors. As for recolors... probably more feminine masks in different colors, cause right now it's very hard for me to make a decent female Toa of Fire, or Stone, without emphasizing other aspects.And just plain more feminine masks in general. Oh, and just about any piece in old purple. So I can make something to match my single purple Pakari. I'm probably gonna think of more later. Zakaro They call me Zakaro. You should too.
Constructelf Posted December 30, 2012 Posted December 30, 2012 Purple pieces. It's impossible to MOC toa of gravity without using paint or HF parts (the latter I don't have; the former, not so sure). 1
Makuta of Time Posted December 30, 2012 Posted December 30, 2012 How about all the other masks that don't have an image to describe them. Like the mask of Clairvoyance or Mask of Adaptation. Which I think there is one.
Sumiki Posted December 30, 2012 Posted December 30, 2012 I've always thought that a one-stud-long axle piece would come in handy. I don't think it would ever be made, but I've come across a number of situations where one would come in very handy. avatar by Lady Kopaka
Ektris Posted December 30, 2012 Posted December 30, 2012 I've always thought that a one-stud-long axle piece would come in handy. I don't think it would ever be made, but I've come across a number of situations where one would come in very handy.Me too! The only problem is there's probably situations where they could get stuck. I've done it with a two-stud axle, so I'm sure a one-stud axle would be even easier.I also have to greatly agree with the McToran colors. That would have been loads of fun.And in the same vein, colored weapons over silver ones would have been swell.~|ET|~ E-T... Phone home. "He walks among us, but he is not one of us."
Toa Smoke Monster Posted December 30, 2012 Posted December 30, 2012 Any Kanohi Masks that do not already come in green to come in green. Regular green, though lime-green and dark green re-colors would be awesome too. That would make me very happy. Everyone is one choice away from being the bad guy in another person's story.
Taipu1 Posted December 30, 2012 Posted December 30, 2012 Toa Metru masks are available in a depressingly low number of colours. And I'll also throw out support for all those who want the correct colours to make known Mctoran, most prominently Tamaru. I'd also extend that to '03 Matoran parts, there are even fewer colours there. - Taipu1.HighFly MatoranShowdownBZPRPG ProfilesHave you seen my Blog? I understand if you haven't
Paleo Posted December 30, 2012 Posted December 30, 2012 A two stud length minifigure bar. It would be so handy when working with HF armoring, and the closest I have right now is a 3-lenth, which sticks out horribly. Flickr
The Legendary TNT Posted December 31, 2012 Posted December 31, 2012 A piece that connects two system pieces bottom to bottom. I have needed one of those so many times. Oh, and a Mask of Creation piece. Do you know how epic that would be?
Dralcax Posted December 31, 2012 Posted December 31, 2012 (edited) A (short) double socket with the pin hole replaced with an axle hole and rotated 90 degrees. Edited December 31, 2012 by Dralcax
Great Being Velika Posted December 31, 2012 Posted December 31, 2012 I think it would be cool to have Kanohi in more colors, and if they made the McToran parts in more colors, so then we would be able to make better villages. I like BZP so much, I named my Minecraft account Dimensioneer.
Bfahome Posted December 31, 2012 Posted December 31, 2012 Waspix heads in more colors. 2.0 hero helmet pieces in more colors. 4-module HF shell in more colors. Pretty much any HF shell in more colors. PONIES FOR EVERYONE!
Takanuinuva Posted December 31, 2012 Posted December 31, 2012 Gold 2.0 Hero factory hands. Rocka is the only hero without hands of his main color. Rocka Gold, Surge Blue, and Breez Green 2.0 Ice Shields Trans Yellow, Trans Dark Red, Trans Clear, Trans Purple, Trans Keetorange, Glatorian heads More Bone pieces in Light grey and Light grey Hero Factory torsos. I am Takanui Nuva. The Toa Nuva of Light I also go by Baron Von Brickenstein AFOL, Gamer and overall nice person.
Based Goomy Posted January 2, 2013 Posted January 2, 2013 I'd love for an Orange Hau to exist Looking for a Voya Gold Kraahkan!
Great Being Velika Posted January 2, 2013 Posted January 2, 2013 To be more specific, I would like Noble Kanohi in silver, and I would like the old feet in more different colors. I like BZP so much, I named my Minecraft account Dimensioneer.
The Legendary TNT Posted January 2, 2013 Posted January 2, 2013 Oh, yeah, and an orange Miru. I just like the Miru, looks like a happy face.
Dibble Flubwibbler of DOOM Posted January 2, 2013 Posted January 2, 2013 (edited) they need to make the 2.0 heads and glatorian heads have masks that work for both head types,like 2-in-1,or at least make the 2.0 and 3.0 helmets for the glatorian heads,and vice versa.ive really wanted to use the bulk 3.0 mask for a lot of things,except i keep running into the same problem of having such a limited number of head colors to use. Edited January 2, 2013 by stargatestaticTH check out my totally ORIGINAL youtube channel, Below Average Geeks! I'm trying something different.its very small, so comments will be noticed and read. just a poll.on a scale of one to ten, how likely are you to read a webcomic based on just this title: 'Neon Laser Dragons.'? see these guys? alrighty bros, listen up.my lightning dragon is lonely.click dis bebe dergen pls.i know its dumb.jus do it pls.for me, a'ight?',:] my Skrall--er, scroll.
CeeCee Posted January 2, 2013 Posted January 2, 2013 I really want Metruan bodies and Bohrok feet in more colours Signature Guidelines: Avatar and signature total file size may not exceed 250 KB!
Peach 00 Posted January 6, 2013 Posted January 6, 2013 I don't really have any desperate need for pieces, but the only ones I'd really want would be all the white pieces on Hahli Inika. All the joints on mine are cracked and definitely have some wear on them. On the day the wall came down / They threw the locks onto the ground And with glasses high / We raised a cry / For freedom had arrived On the day the wall came down / The ship of fools had finally run aground Promises lit up the night / Like paper doves in flight I dreamed you had left my side / No warmth, not even pride remained And even though you needed me / It was clear that I could not do a thing for you Now life devalues day by day / As friends and neighbors turn away And there's a change that even with regret / Cannot be undone Now frontiers shift like desert sands / While nations wash their bloodied hands Of loyalty, of history / In shades of grey I woke to the sound of drums / The music played, the morning sun streamed in I turned and I looked at you / And all but the bitter residues slipped away slipped away...
Plague Posted January 7, 2013 Posted January 7, 2013 different ball joint colors... I almost always use black, but i sometimes use red when I really need to. I wish there werre more colors so my MOCs would flow more. http://www.mocpages.com/home.php/67904 < My Mocpages! My first (and currently ONLY) MOC on BZP! > http://www.bzpower.c...?showtopic=5426 PLAGUEAvatar pic taken [and edited] by me. DON"T STEAL IT!
B.M.800 Posted January 8, 2013 Posted January 8, 2013 All of them. X100000000. I think that would keep me busy... and very happy. Doah!
Dibble Flubwibbler of DOOM Posted January 10, 2013 Posted January 10, 2013 maybe glatorian and HF hands with articulated fingers,while still keeping the axel hole in place by the thumb.much like the comics. check out my totally ORIGINAL youtube channel, Below Average Geeks! I'm trying something different.its very small, so comments will be noticed and read. just a poll.on a scale of one to ten, how likely are you to read a webcomic based on just this title: 'Neon Laser Dragons.'? see these guys? alrighty bros, listen up.my lightning dragon is lonely.click dis bebe dergen pls.i know its dumb.jus do it pls.for me, a'ight?',:] my Skrall--er, scroll.
Manterax Prime Posted January 19, 2013 Posted January 19, 2013 Every single socket piece from Bionicle using the indestructible HF ball socket. Tired of broken BIONICLE sets? Support the Remolded Sockets Service Pack project by Kon1 on CUUSOO http://lego.cuusoo.com/ideas/view/17500Want more female characters to stand with you BIONICLE or HF collection? Support Bunyip's Constraction Line for Girls project on CUUSOO http://lego.cuusoo.com/ideas/view/6801
Pomegranate Posted January 19, 2013 Posted January 19, 2013 (edited) I would have absolutely loved to see more translucent pieces, like on the Inika. I remember back when I was 10, and my friend and I found leaked inages of Jaller and Matoro 'Igniters', we were super excited thinking that all the toa the next year would have translucent connecting parts-- but alas, they were the only ones. I think that it would really have made the Inika stand out more. Edited January 19, 2013 by The Darkest Hunter .
Banjax2077 Posted January 19, 2013 Posted January 19, 2013 I need more Tri-connectors and I wouldn't mind a black hau nuva.
Akuna Toa of Sonics Posted January 22, 2013 Posted January 22, 2013 Aside from the obvious more pieces in rare colors post, I would have absolutely loved at least some of the old-style Kanohi to be remade to be compatible with the Metru head, and in turn, the Glatorian head. Does anyone want to play the Master Chief Collection with me? I'm trying to get a team going for ranked. PM for GT.
Manterax Prime Posted January 23, 2013 Posted January 23, 2013 PONIES FOR EVERYONE! Heh....heh.......NO! Tired of broken BIONICLE sets? Support the Remolded Sockets Service Pack project by Kon1 on CUUSOO http://lego.cuusoo.com/ideas/view/17500Want more female characters to stand with you BIONICLE or HF collection? Support Bunyip's Constraction Line for Girls project on CUUSOO http://lego.cuusoo.com/ideas/view/6801
northmarch Posted January 23, 2013 Posted January 23, 2013 Apart from the obvious recolored original kanohi, matoran and master builder set rahi pieces (we need original Pewku). The 2 pronged Speer used by the Ta-Koro guard and Surrel's helmet. All the other Kanohi can be molded for use in official sets when Bionicle eventually reterns.(not wishful thinking... Ambition)
~garnira returns~ Posted January 24, 2013 Posted January 24, 2013 Aside from the obvious more pieces in rare colors post, I would have absolutely loved at least some of the old-style Kanohi to be remade to be compatible with the Metru head, and in turn, the Glatorian head.Agreed. Also Mctoran stuff, and perhaps more mask colors. "Copy and paste me into your sig! The shadows command you!" ( ͡° ͜ʖ ͡°)#tumaislove,tumaislife
Guest Nexxus Posted January 30, 2013 Posted January 30, 2013 Mine would mainly be masks, specifically, Komau in more colors, Faxon in more colors(even though there's already dark blue and lime), and my highest want, the Kiril in more colors. It's one of my favorite masks, and though I know the Pehkui looks exactly the same, the Kiril's power is so much better.
Wazdakka Posted February 2, 2013 Posted February 2, 2013 2003 Matoran pieces. E.g. I wanna build Kongu and Nuparu in that fashion, but you literally can't. I've seen some good MOCs, but they'd still stand out. Wants: 2003 Jaller (from Jaller and Gukko), Exo-Toa, Turaga Nuju, Turaga Vakama, Shadow Kraata, Axonn, Brutaka, Vezon & Fenrakk, Nocturn, ORANGE FIKOU. I got rid of my picture, are you happy?
Guest Takua the Chronicler7 Posted February 4, 2013 Posted February 4, 2013 ALL Kanohi in different colors. Maybe other pieces in different colors that we don't see much of.
TechnicRage Posted February 23, 2013 Posted February 23, 2013 (edited) Orange Inika body armour- the sleak one. Oh, and 4 2008 bley socket connectors (arms & legs). No really many armour pieces in Carapar's weird colour and any one prototype piece. Edited March 3, 2013 by TechnicRage
AdaptingChaos Posted February 25, 2013 Posted February 25, 2013 I would love to have some different looking mask for the Inika heads, I would also want some recolored weapons and all masks! Also wouldn't it be awesome if they made a Kanohi Olisi and the Mask of Creation?
Daiker Posted February 25, 2013 Posted February 25, 2013 I've always thought that a one-stud-long axle piece would come in handy. I don't think it would ever be made, but I've come across a number of situations where one would come in very handy.How so?? Those light saber poles in more sizes.
Hitoshura Posted February 26, 2013 Posted February 26, 2013 I would love to have some different looking mask for the Inika heads.Yes that would be really nice. Inika eyes can only be green, we need MORE colors. profiles
AdaptingChaos Posted February 27, 2013 Posted February 27, 2013 I would love to have some different looking mask for the Inika heads.Yes that would be really nice. Inika eyes can only be green, we need MORE colors.Lol that would be very cool, have people ever colored the head to make different colored eyes?
Klanadack Posted March 16, 2013 Posted March 16, 2013 A mask of creation, some more purple pieces, and maybe a pack that had random mctoran pieces in any possible bionicle color. Chuck Norik is no match for Bruce Lhikan! If you use correct grammar in your posts (or try hard to), place this in your signature. Join Myst's campaign for correct grammar usage on BZPower!
Zacian Posted March 17, 2013 Posted March 17, 2013 I always wished for something that looks like Cordak Blasters for Hero Factory. I'm sick of those old sphere things.
Recommended Posts